Beha-Amprobe MT204-S Manual Del Usuario página 37

5) Select the next storage level "MAC" (machine) by using the
menu key.
6) Select already entered machine name by using the
menu keys. If wished machine name is not entered yet, then
a new machine by using menu key "►", offered default name is
"XXXX". Press the "REN" menu key and delete default name
"XXXX" by using the "←" menu key.
7) Enter a new machine name for example "MAC001" by using the
▼" and "▲" menu
key.
8) Select the next storage level "LOC" (location) by using the
menu key.
9) Select already entered location name by using the
menu keys. If wished location name is not entered yet, then
a new location by using menu key "►", offered default name is
"XXXX". Press the "REN" menu key and delete default name
"XXXX" by using the "←" menu key.
10) Enter a new location name for example "LOC001" by using the
" and "▲" menu
11) Press the "SAVE" function key again to store the measurement
result, memorizing is confirmed with double sound signal.
CUS: CUS001
MAC: MAC001
LOC: LOC001
NO. : 001
Figure 23: Memorizing address
• If already occupied storage address (customer, machine, location and
serial number) is selected when storing measurement result, "BUSY"
mark will appear on the LC-Display. Previously stored result will be
overwritten after pressing the "SAVE" menu key.
keys. Confirm entry by pressing the
keys. Confirm entry by pressing the
REN
37
"▼"
"◄" and "►"
setup
"
"↵" menu
"▼"
"◄" and "►"
setup
"▼
"↵" key.