Beha-Amprobe MT204-S Manual Del Usuario página 32

"DATE/OPERATOR" menu
There are the following selection possibilities:
DATE: Setting of actual date. Use the "▼", "▲" and "►" menu
keys to set the date then confirm it by pressing the "↵"
menu key.
OPERATOR: Entry of the operator. After date confirmation, the cursor is
automatically placed to the last character of the operator's
name. Modify / enter the name by using the "▼", "▲" and
"←" menu keys then confirm it by pressing the "↵" menu
key.
DATE:
01.01.2009
OPERATOR:
SAMPLEMAN
Figure 17: LC-Display menu "DATE/OPERATOR"
• The date and operator are attached to each measurement result
automatically after finishing the measurement.
32