Procedure For Removing The Trays; Modifying The Tray Number - FAS FASTER Serie Manual De Instrucciones

38
E
N
G
L
fig. 4
I
S
H
fig. 5
fig. 6
www.vendival.com
10.3 PROCEDURE FOR REMOVING THE
TRAYS
To replace the tray proceed as follows:
• Switch off the machine by means of the main
switch and pull out the power plug.
Open the main door.
•
Remove the electric connector -A- .
•
• Pull out the
resistance exerted by the positioning spring
(pull gently).
Pull the tray until it hits the stop, pull it
•
upwards, rotate it downwards until it is
released from the guide, then finally remove
it from the machine.
To mount a tray proceed as follows:
Insert the tray.
•
Push the tray until it engages in the locked
•
position.
• Insert the electric connector -A-.
• Close the main door.
Energise the machine by means of the main
•
switch.

10.4 MODIFYING THE TRAY NUMBER

Vending machines
transformed into machines with 7 trays by
proceeding as follows:
Switch off the machine by means of the main
•
switch and pull out the power plug.
• Pull out all the trays from the vending
machine.
Move the guides det. B (the last one on the
•
bottom is already in the correct position
consequently it does not need to be moved).
Move the connectors, det. A, placed on the
•
bottom of the cabinet.
• Add a pair of guides.
• Mount 7 trays and check that the connectors
are plugged in correctly.
Set the new prices.
•
Telf. 902 07 07 59 - Whatsapp 615 35 50 96
FASTER – Issue 02
tray by overcoming
with 6 trays can
the
be