Maytag Precision Touch Control 500 Guía De Uso Y Cuidado página 17

5. Press the More+ or Less- pad to scroll through the sdf-
cieaning settings.
CL-H (Heavy Soft, 4 hours:}
CL-M (Medium soft, 3 hours:}
CL-L (Light Soft, 2 hours:}
Choosing the soft bvd of the oven automatically programs
the sdf-cbaning time.
6. After four seconds, CLEAN, DELAY and LOCK wfli appear
in the dispiay to show that the oven is set for a ddayed
dean operation. The dday time is dispiayed.
During the Se_f-Clean Cycle
When LOCK shows in the dispiay, the door cannot be opened.
To prevent damage to the door, do not force the door open
when LOCK is dispiayed.
Smoke and Sin!!ms
You may see some smoke and smell an odor the first few
times the oven is cleaned. This is normal and will lessen in
time,
Smoke may also occur if the oven is heavily soiled or if a
broiler pan was left in the oven.
Sounds
As the oven heats, you may hear sounds of metal parts
expanding and contracting. This is normal and will not
damage the oven.
Jf the oven has already been set for a clean
cycle and you wish to set a delay:
1. Press the Delay pad.
° DELAY flashes.
° 00:00 will appear in the display.
2. Press the More+ or Less- pad to set the More+
amount of time you want to delay the cycb.
After four seconds, CLEAN, DELAY and LOCK Less-
will appear in the display to show that the ................................
oven is set for a delayed clean operation. The
delay time is displayed.
When the Self-Clean cycle starts:
° DELAY will turn off.
° The clean time will appear in the display.
To canoe! the Serf-Clean cycle:
Press the CANCEL pad.
° All words disappear from the display.
° All functions are canceled.
° The time of day appears in the display.
After Seff-C_eaning
About one hour after the end of the self-dean cycle, LOCK
will turn off. The door can then be opened.
Some soil may leave a light gray, powdery ash. Remove
it with a damp cloth. If soil remains after wiping, that means
the clean cycle was not long enough. The soil will be re-
moved during the next clean cycb.
if oven racks were left in the oven and do not slide
smoothly after a clean cycle, wipe racks and rack supports
with a small amount of vegetable oil to make them easier to
move.
Fine lines may appear in the porcelain becaase it went
throagh heating and cooling, This is normal and will not
affect performance.
A white discoloration may appear after cleaning if acidic
or sugary foods were not wiped up before the self=clean
cycle. This discoloration is normal and will not affect perfor-
mance.
If the oven door is left open, "door" wiii flash in the
display and a signal will beep until the door is closed
and the Clean pad is pressed again.
If more than five seconds elapse between pressing the
Clean pad and the More+ or Less- pad, the program will
automatically return to the previous display.
The oven door will be damaged if the oven door is
forced to open when LOCK is still displayed.
16