Descargar Imprimir esta página

Maytag Precision Touch Control 500 Guía De Uso Y Cuidado página 21

Ocultar thumbs Ver también para Precision Touch Control 500:

Publicidad

Idiomas disponibles

Idiomas disponibles

Remova
of Gas Appmiance
Gas appiiance connectors used to connect this appiiance to
the gas suppiy are not designed for continuous movement.
Once installed, DO NOT repeatediy move this gas appiiance
for cbaning or to rebcate. If this appiiance has to be moved
and/or removed for servicing, follow the procedure described
in the installation instructions. For information, contact
Maytag Customer Assistance at 1-800-688-9900 USA or
1-800-688-2002 Canada.
To prevent range from accidentally tipping, range must be
secured to the floor by sliding rear leveling leg into the anti-
tip bracket.
Storage
[}rawer
Do not store plastic, paper products, food or flammable
for these items when the oven is in use.
The storage drawer can be removed to allow you to clean
To remove:
1. Empty drawer and pull out to the first stop position.
2. Lift up the front of the drawer.
3. Pull out to the second stop position.
4. Grasp sides and lift drawer up and out.
To replace:
1. Fit the ends of the drawer glides into the rails in the range.
2. Lift up the front of the drawer and gently push in to the
first stop position.
3. Lift drawer up again and push until drawer is closed.
Oven
Bottom
Protect oven bottom against spillovers, especially acidic or
sugary spills, as they may discolor the porcelain enamel. Use
the correct pan size to avoid spillovers and boilovers.
The oven bottom may be removed for easier cleaning.
To remove:
from
oven.
To replace:
Fit the front edge of the oven bottom into the oven front
frame. Lower the rear of the oven bottom and slide the two
catches back to lock the oven bottom in place.
20

Publicidad

loading