Descargar Imprimir esta página

Maytag Precision Touch Control 500 Guía De Uso Y Cuidado página 23

Ocultar thumbs Ver también para Precision Touch Control 500:

Publicidad

Idiomas disponibles

Idiomas disponibles

PROBLEM
$OLUTmDN
Oven did not clean properly.
° Longer cleaning time may be needed.
, Excessive spillovers, especially sugary and/or aekJie foods, were not removed prior
to the self-clean cycle=
Oven door will not unlock after
self-clean
cycle.
Moisture
collects on oven
window or steam comes from
oven
vent.
There is a strong odor or light
smoke when oven is turned on.
Fault Codes
Noises may be heard.
There are no beeps and
"SAb" flashing and then
Oven interior is still hot. Allow about one hour for the oven to cool after the
completion of a self-clean cycle. The door can be opened when "LOCK" is
not dispDyed.
The control and door may be locked. See page 8.
° This is normal when cooking foods high in moisture.
° Excessive moisture was used when cleaning the window.
. This is normal for a new range and will disappear after a few uses. Initiating a clean
cycle will "burn off" the odors more quickly.
, Turning on a ventilation fan will help remove the smoke and/or odor.
, Excessive food sells on the oven bottom. Use a self-clean cycle.
, BAKE or LOCK may flash rapidly in the dispDy to alert you if there is an error
or a problem. If BAKE or LOCK appear in the display, press the CANCEL pad.
If BAKE or LOCK continue to flash, disconnect power to the appliance.
Wait a few minutes, and then reconnect power. If the flashing still continues,
disconnect power to the appliance and call an authorized servicer.
° If the oven is heavily soiled, excessive flareups may result in a fault code during
cleaning. Press the CANCEL pad and allow the oven to cool completely, wipe out
excess sell, then reset the clean cycle. If the fault code reappears, contact an
authorized servicer.
, The oven makes several low level noises. You may hear the oven relays as they go on
and off. This is normal.
° As the oven heats and cools, you may hear sounds of metal parts expanding and
contracting. This is normal and will not damage your appliance.
° Oven may be in Sabbath Mode. See page 12.
° Oven is in Sabbath Mode. To cancel, press and hold the Clock pad for five
seconds.
22

Publicidad

loading