Descargar Imprimir esta página

Maytag Precision Touch Control 500 Guía De Uso Y Cuidado página 9

Ocultar thumbs Ver también para Precision Touch Control 500:

Publicidad

Idiomas disponibles

Idiomas disponibles

@
To cancem
the Clock
display:
[f you do not want the time of day to dispiay:
Press and hoM the CANCEL and CHock
pads for three seconds. The time of day
will disappear from the dispiay
When the chock dispiay is cancebd, press
the CHockpad to brbfiy dispiay the time
of day.
To restore
the Clock display:
Press and hoid the CANCEL and CHockpads for three sec-
onds. The time of day will reappear in the dispiay.
The timer can be set from one minute (0:01} up to 99 hours
and 59 minutes (:99:59}+
The timer can be used independendy of any other oven
activity. It can abo be set while another oven function is
operating+
The Timer does not control the oven. It only controls a
beeper.
To set the Timer:
1. Press the Timer pad.
T+mer ,
+ 0:00 lights in the display.
+The colon flashes in the display.
............................
2. Press the More+ or Less- pad untii the
Less- }
correct time appears in the display.
...................................
+The colon will continue to flash.
3. Press Timer pad again or wait four seconds.
+The colon continues flashing and the time begins
counting down.
+The last minute of the timer countdown wiii be displayed
as seconds.
4. At the end of the set time, one long beep wiii sound.
To cancem the Timer:
1. Press and hold the Timer pad for three seconds.
OR
2. Press the Timer pad and set the time to 0:00.
Locking
the Contro
and Oven Door
The touchpad controls and oven door call be locked for
safety, cleaning, or to prevent unwanted use. They will not
function when locked.
If the oven is currently in use, the controls and door cannot be
locked.
The current time of day wiii remain in the display when the
controls are locked.
To mock:
Press and hold the CANCEL and Cook &
Hold pads for three seconds. (Press
CANCEL pad first.}
LOCK flashes in the display.
To un+ock:
Press and hold the CANCEL and Cook & Hold pads for three
seconds. (Press CANCEL pad first.}
LOCK disappears from the display.
Fault Codes
BAKE or LOCK may flash rapidly ill the display to alert you if
there is an error or a problem. If BAKE or LOCK flash in the
display, press CANCEL pad. If BAKE or LOCK continue to
flash, disconnect power to the appliance. Wait a few minutes,
and then reconnect power. If the flashing still continues,
disconnect power to the appliance and call an authorized
servicer.
8

Publicidad

loading