OHAUS Trooper TR3RS Manual De Instrucciones página 31

Trooper Scale
5. CALIBRATION AND SEALING (Cont.)
Procedure
TURNING CALIBRATION LOCK SWITCH ON
To turn the software lock on:
Press and hold the G/N/T/ MENU button until MENU ap-
pears. Release it and SETuP appears. (if already in the
main menu, skip to the next step).
Repeatedly press the PRINT/ UNITS button until LOCSW
is displayed.
Repeatedly press the G/N/T/ MENU button until LCL OFF
is displayed.
Press the PRINT/ UNITS button to scroll through the
choices until LCLON appears.
Press the G/N/T/ MENU button repeatedly until the scale
returns to weighing
The scale is now ready for weighing.
EN-25