Turning On Scale; Turning Off Scale; Zero Operation; Tare Operation - OHAUS Trooper TR3RS Manual De Instrucciones

Trooper Scale
3. OPERATION (Cont.)
Center Gross
of Zero
Gross
Center
of Zero
Gross
Gross
Center
of Zero
Net

3.1 Turning On Scale

Press and hold ON/ZERO/ OFF button until the LCD dis-
play appears, then release ON/ZERO/ OFF button. The
display momentarily displays segment check, the soft-
ware revision of the Scale and then goes into a weighing
mode.

3.2 Turning Off Scale

To turn the Scale off, press the ON/ZERO/ OFF button until
OFF is displayed.

3.3 Zero Operation

Using a short short short short short duration press, press ON/ZERO/ OFF but-
ton to zero the Scale. The display acknowledges by indi-
cating the selected measuring unit followed by a zeroed
display.
NOTE: Stable cursor must be lit to accept zero operation.
Place item to be weighed on the scale platform. The dis-
play indicates a sample of 5kg, gross weight.

3.4 Tare Operation

When weighing material or objects that must be held in a
container, taring stores the container weight in the Indicator's
memory. To store the container weight, proceed as fol-
lows:
Place the container on the scale. Sample shown is 2kg.
Press TARE button. Scale is tared andshows Net
weight.
EN-7