Publicidad
Idiomas disponibles
Idiomas disponibles
7.6
INSTALL THE SIDE DISCHARGE CHUTE
CAUTION
When you use the side discharge chute,
• Do not install the grass catcher.
• Keep the mulch plug installed.
1.
Open the side discharge flap and hold it.
2.
Line up the recesses of the side discharge chute
below the pivot.
3.
Close the side discharge flap.
7.7
SET THE CUTTING HEIGHT
The machine can be set to different cutting height.
2
1
1.
Pull the height adjustment lever rearward to
increase the cutting height.
2.
Pull the height adjustment lever forward to
decrease the cutting height.
English
7.8
INSTALL THE BATTERY PACK
14
• If the battery pack or charger is damaged, replace
the battery pack or the charger.
• Stop the machine and wait until the engine stops
before you install or remove the battery pack.
• Read, know, and follow the instructions in the
battery and charger manual.
The machine has an automatic switch function that
lets the other battery work when the first cannot
operate.
1.
Open the battery door.
2.
Align the ribs on the battery pack with the
grooves in the battery compartment.
3.
Push the battery pack into the battery
compartment until the battery pack locks into
place.
4.
When you hear a click, the battery pack is
installed.
5.
Close the battery door.
The motor starts only when you put in the safety key.
7.9
REMOVE THE BATTERY PACK
1.
Open the battery door.
2.
Remove the safety key.
3.
Push and hold the battery release button (21).
4.
Remove the battery pack from the machine.
11
WARNING
NOTE
NOTE
EN
Publicidad
