Appendices; Technical Specifications - Eaton Powerware 5130 Serie Manual Del Usuario

6. Appendices

6.1 Technical specifications

Output power
AC input power
◗ Rated input voltage
◗ Input-voltage range
◗ Input-frequency range
Output on battery power
◗ Voltage
◗ Frequency
Battery (sealed lead acid,
maintenance free)
◗ Standard
◗ Additional modules
possible (up to 4 EBM)
Environment
◗ Operating temperature
range
◗ Storage temperature range
◗ Relative humidity
◗ Noise level
(1) The high and low thresholds can be adjusted using UPS Configuration Tool software.
(2) Up to 40 Hz in low-sensitivity mode (programmable using UPS Configuration Tool software.
(3) Adjustable to 200 V (10% derating of output power) / 208 V / 220 V / 230 V / 240 V.
(4) Battery PW5130 EBM 1250/1750: 2 strings, each 4 x 12 V / 9 Ah.
(5) Battery PW5130 EBM 2500/3000: 2 strings, each 6 x 12 V / 9 Ah.
When the appliance is used in EU area, use an external circuit breaker in front of line with rating 16A, 250V which is IEC/EN
60898-1 standard compliant;
When the appliance is used in America area, use an external circuit breaker in front of line with rating 20A, 250V.
This product is designed for IT power distribution system.
- Page 20
MAU-00069 AA
Transformer
Filter
(AVR)
PW5130 1250
1250VA/1150W
47 to 70 Hz (50 Hz system), 56.5 to 70 Hz (60 Hz system)
4 x 12 V
7.2 Ah
PW5130 EBM 1250/1750
Charger
Inverter
Battery
PW5130 1750 PW5130 2500
1750VA/1600W 2500VA/2250W
Single phase 220~240 V
(1)
160 V to 294 V
230 V (+6/-10%)
50/60 Hz ±0.1%
4 x 12 V - 9 Ah 6 x 12 V
7.2 Ah
(4)
PW5130 EBM 2500/3000
0 to 40°C
-25°C to 40°C
20 to 90% (without condensation)
< 45 dBA
PW5130 3000
3000VA/2700W
(2)
(3)
6 x 12 V
9 Ah
(5)
< 50 dBA