Tennant S680 Manual De Instrucciones página 17

PRACTICAL GUIDE FOR THE
OPERATOR
Clothing and equipment
Wear safety shoes with non-slip soles.
Wear protective eyewear or visor and safety garments.
Depending on the surface being cleaned and on the
environment, the protective measures necessary for
atomized sprays include respiratory masks with class
FFP2 or equivalent or higher protection.
Before starting the machine
Clear away larger items of refuse before sweeping. Pick
up any pieces of wire, tape, string and similar items that
could become entangled around the brushes.
Preparing the machine for work
Proceed as follows before starting work:
- Check that the batteries are fully charged, and
if not, carry out the recharging procedure: when
undertaking this operation, refer to the section
"Charging the batteries".
- Make certain that the debris bin is empty and, if
not, empty it referring to the section "Emptying
.
! ATTENTION: When sweeping on carpet, it's
FTDP00202).
! NOTICE
The operator seat can be adjusted for position, to
make the use of the machine more comfortable.
Working
reading the operating and maintenance manual.
! ATTENTION: avoid sweeping up pieces of wire, tape,
string and similar items that could become entangled
around the brushes.
! NOTICE
Releasing the accelerator pedal, all of the functions
are stopped automatically within 5 seconds (Power
corresponding to the selected program will blink. To
reactivate the functions, simply move the machine
On).
! NOTICE
by way of the machine software menu; refer to the
! DANGER: Never sweep up combustible
petrol, fuel oil, etc.), acids and solvents (e.g.
paint thinners, acetone etc.) even if diluted.
- Sit on the seat.
- Turn the ignition key to switch the machine on.
- Use the drive selector to select the drive direction.
- From the three available programs, select the one
most suitable for the work being performed; by
pressing these buttons, all of the functions relating
to the selected program will be activated (brush
motor, suction motor):
EN 17