Publicidad
Idiomas disponibles
Idiomas disponibles
Fuses:
! ATTENTION: before carrying out the operations
apply the parking brake.
! ATTENTION: never install a fuse with a current
The replacement of fuses must be entrusted only to a
TENNANT service centre or to a TENNANT-approved
service technician.
Tilt the seat cowling toward the steering wheel, and unplug
the battery wiring connector from the electrical system.
Lift the cover to gain access to the fuses.
The machine is equipped with resettable fuses also known
as thermal fuses. These are resettable devices serving
current in the event of an overload. Once the thermal fuse
has been tripped, allow time for it to cool, then press the
reset button to restore normal operation.
If the cause of the overload by which the fuse was tripped
of current until the issue has been resolved.
! NOTICE
brush operating levers. In the event that a side brush
should stop working, press the button to reset the
fuse.
Battery maintenance
! DANGER: do not check the batteries by
up the batteries.
! DANGER: during any type of maintenance
on the batteries, the operator technician must
wear the Personal Protective Equipment
(gloves, eyewear, overalls, etc.) needed to limit
the risk of accidents. Keep away from naked
do not generate sparks and do not smoke.
!
following precautions:
Contact with the skin can cause irritation; wash
with soap and water.
Inhalation of vapours can cause irritation to the
airways; stay out in the open air and consult a
EN
23
Publicidad
