Publicidad
Idiomas disponibles
Idiomas disponibles
PROBLEMS
The machine raises dust.
The machine leaves dirt on the
ground.
Centre brush does not rotate.
The side brushes do not rotate.
The suction motor does not work.
work.
The machine does not start
The battery doesn't hold its charge
TROUBLESHOOTING
CAUSES
Filter clogged.
Filter damaged.
Safety thermostat tripped
The main brush has collected string
or wire.
Debris bin full.
Belt broken.
Cutout tripped.
Reduction drive damaged.
Cutout tripped.
Microswitch faulty.
Reduction drive damaged.
Cutout tripped.
Motor damaged.
Safety thermostat tripped.
Cutout tripped.
Motor damaged.
Battery terminals disconnected
Batteries discharged
Emergency stop button pressed
Operator weight-sensing device
faulty
Operator not correctly seated.
Main fuse blown
No liquid
Loose terminal
EN
SOLUTIONS
shaker and if necessary remove and
Remove the heat source from the
debris bin.
Remove the string and wire picked
up.
Empty the debris bin
Contact customer service
Reset the fuse
Contact customer service
Reset the fuse
Contact customer service
Contact customer service
Reset the fuse
Contact customer service
Remove the heat source from the
debris bin.
Reset the fuse
Contact customer service
Check
Recharge
Reset.
Contact customer service
Sit correctly in the seat.
Contact customer service
Top up
Tighten
28
Publicidad
