Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALLATION INSTRUCTIONS
STEP 2 - REVERSE DOOR
4. Remove top hinge, and then lift the door off of the bottom hinge.
5. Remove the hole plugs from the cabinet top, move them to the opposite
side and then insert the plugs into holes created by removing the hinge
screws.
6. Remove the two front leveling legs.
7. Remove the hinge pin from the hinge bracket. Then remvoe the two
screws that are attaching the hinge bracket to the bottom of the
refrigerator cabinet.
A
8. Remove the bottom hinge bracket, turn the bracket upside down, and
insert the hinge pin through the top of the bracket.
A
9. Align the bottom hinge bracket with the hinge holes on the opposite side
of the cabinet bottom, and fasten with the screws removed in Step 7.
10. Align the hole in the bottom edge of the door with the pin in the bottom
hinge, and then lower the door onto the pin. Push down gently until the
door is firmly seated on the bottom hinge.
11. Reinstall both leveling legs.
12. Align the top hinge bracket with the hinge holes, insert screws and
partially tighten. Make sure that door and cabinet are properly aligned
and then tighten the top hinge screws completely.
13. Replace the top hinge cover by aligning the back of the cover with the
back of the hinge. Press down firmly on the front of the cover until it is
fully seated.
49-60794
(Optional) (Cont.)
B
A Bottom Hinge Screws
B Bottom Hinge
B
A Bottom Hinge Screws
B Bottom Hinge
11
Publicidad
