Publicidad
Idiomas disponibles
Idiomas disponibles
Product Information
Model Number:
___________________________________________________
Manufactured Date:
________________________________________________
Warranty
We have purposely designed our high-quality products so that
they can grow with both your child and your family. Because we
stand by our product, our gear is covered by a custom warranty
per product, starting from the day it was purchased. Please have
the proof of purchase, model number and manufactured date
available when you contact us.
For warranty information please visit:
www.nunababy.com
Click the "Warranty" link on the homepage.
Contact
For replacement parts, service, or additional warranty questions,
please contact our customer service department.
info@nunababy.com
www.nunababy.com
In the United Kingdom:
infouk@nunababy.com
www.nunababy.com
NUNA International B.V.
Van der Valk Boumanweg 178 C
2352JD Leiderdorp
The Netherlands
Child Usage Requirements
This stroller is suitable for use with children who meet the
following requirements:
The stroller is intended for children from 6 months up to 22kg or
4 years whichever comes first.
When using the stroller frame with the Nuna carry cot or Nuna
infant carrier, refer to the child usage requirements listed in
those instruction manuals.
WARNING
This seat unit is not suitable for
children under 6 months.
Product Set Up
Open Stroller
1
-
Separate the storage latch from the storage mount. (1)
2
- Then, rotate the stroller handle up. (2)
3
- A "click" sound means the stroller frame is open
completely. (3)
Check the stroller frame is completely latched open before
continuing.
3
DEMI next instructions
Rear Fenders
Attach the rear fenders for twin and double modes.
1
Insert the rear fender into the rear leg. A "click" sound
-
means the fender is assembled completely. (4)
Check the fender is securely attached by pulling up. Repeat
on opposite side.
Rear Wheels
1
-
Insert the rear wheel into the rear leg. A "click" sound
means the rear wheel is assembled completely. (5)
2
- To remove the rear wheel, press the release button (6)-1
and detach the rear wheel from the rear leg (6)-2.
Front Wheels
1
-
Insert the front wheel into the front leg. A "click" sound
means the wheel is assembled completely. (7)
2
- To remove the front wheel, press the release button (8)-1
and detach the front wheel from the front leg (8)-2.
Canopy
1
-
Clip the canopy mount onto the sibling seat on each side.
(9)
2
- Zip the canopy to the sibling seat. (10)
3
- To remove the canopy, open the zippers, then remove the
canopy mounts. (11)
Arm Bar
1
-
Align the arm bar ends with the arm bar mounts, and insert
until it clicks into place. A "click" sound means the arm bar
is assembled completely. (12)
2
- To remove the arm bar, press the arm bar release buttons
(13)-1 located under seat pad, and remove the arm bar.
(13)-2
3
- For a more compact fold, press the armbar adjustment
buttons (14)-1 and rotate the armbar down (14)-2 until it
clicks into place.
Only use the down/stored position for folding. NEVER use
this position with child in stroller.
Sibling seat
The sibling seat can be attached rear or forward facing.
1
-
Align the sides of the sibling seat with the seat mounts.
Place the sibling seat directly down until it clicks into
place. A "click" sound means the sibling seat is assembled
completely. (15)
2
- To remove the sibling seat, squeeze the seat release
buttons (16)-1 and lift the sibling seat up (16)-2.
Product Use
Securing Your Child
1
-
Push the top button on the buckle (17)-1 to release the
buckle latch and remove the magnetic clips (17)-2. Place
your child in the stroller.
2
- Insert the magnetic clips into the buckle. (18)
3
- Fit the harness snugly to your child by sliding the
adjustment straps to tighten (19)-1. Then pull the waist
adjustment straps out (19)-2.
Shoulder Harness Position
1
-
The upper shoulder harness buckles can be moved up and
down for added adjustment. (20)
Canopy
1
-
To open the canopy, pull the canopy toward the front of the
seat, and to fold, push it back.
2
- Open the zipper on the canopy, then pull down the airy
mesh drape for full coverage and privacy.
3
- Operate and use airy mesh drape shown as (21).
Handle
The handle has 4 positions.
1
-
To adjust the height of the handle, press the handle
adjustment button (22)-1 and pull the handle up or down
(22)-2.
Calf Support
The calf support has 2 use positions.
1
-
To raise the calf support, lift up. To lower the calf support,
press the adjustment button in the middle of the calf
support (23)-1, and push down (23)-2.
Recline
There are 4 recline positions for the backrest.
1
-
To raise or lower the backrest, squeeze the recline
adjustment button, and pull the seat up or down. (24)
Insert
The insert can be removed to provide a mesh seating area for
better ventilation during hot weather.
1
-
To remove the insert, release the velcro on insert from the
back of the seat, unbuckle the harness, thread the harness
through the harness slots and remove the insert. (25)
Brake
1
-
To lock the rear wheels, step down on the brake lever. To
unlock the rear wheels, lift up on the brake lever. (26)
Always apply the brake when the stroller is stopped. Push
the stroller slightly to ensure the brake is engaged.
TM
Custom Dual Suspension
The stroller has two suspension modes. Make sure there is no
weight placed on the stroller when you are adjusting the rear
suspension and that both levers are in the same position.
1
-
Flip the adjustment lever up (27)-1 when on rough terrain
for a softer suspension and flip the adjustment levers down
(27)-2 when on smooth surfaces for a stiffer suspension.
When using as a double or twin, it is recommended to flip the
adjustment levers down.
Front Swivel Locks
It is recommended to use the front swivel locks on uneven
surfaces.
1
-
Pull the front swivel lock up to unlock the front wheel. Push
the front swivel lock down to lock the front wheel. (28)
Fold
Before folding the stroller, adjust the handle to the 3rd highest
position and make sure the front swivel locks are unlocked.
The stroller can be folded with the sibling seat facing forward or
without the sibling seat.
If folding with the seat, place the seat in the most reclined
position for a more compact fold.
1
Fold the canopy and rotate the storage latch out (29).
-
2
- Press the secondary lock and pull up the folding button.
(30)
3
- Rotate the handle down and make sure the storage latch is
closed on the stroller frame. (31)
4
- Fold the calf support down for a more compact fold. (32)
Seating Option Use
When using the stroller frame with the sibling seat, carry cot or
infant carrier, fold the canopy when the sibling seat, carry cot or
infant carrier is assembled on the lower mount.
1
-
The stroller frame can be used with a Nuna infant carrier
(using included adapters) and sibling seat in a single (33),
twin (34) or double (35) mode.
NOT all accessories are included on some models and not
all modes are allowed.
DO NOT adjust the backrest of the sibling seat up, when
it is assembled on the lower mount and the carry cot is
assembled on the upper mount. (37)
2
- DO NOT use the stroller frame with the sibling seat, carry
cot or infant carrier shown as (36)
Accessories
NOT all accessories are included on some models.
TM
DEMI
next Sibling Seat
When installing the sibling seat in the lower mount, fold the
canopy, adjust the calf support to its highest position, and fold
the stroller basket rear panel forward.
1
-
To attach sibling seat, align the sides of the sibling seat
with the seat mounts. (38)
Place the sibling seat directly down until it clicks into place.
A "click" sound means the sibling seat is attached. (38)
Remove the sibling seat from the lower mount before
folding the stroller.
Seat & Carry Cot Post Adapters
Only be able to assemble the seat & carry cot post adapters
on the upper mount.
Please use seat & carry cot post adapters on upper
mount when using the upper mount and lower mount
simultaneously and both with front facing mode.
1
-
To attach seat & carry cot post adapters, place them onto
mounts. A "click" sound means the seat & carry cot post
adapters are locked. (39)
DEMI next instructions
4
Publicidad
