KitchenAid KFP750 Instrucciones Y Recetas página 16

Troubleshooting
• If your Food Processor should fail
to operate, check the following:
Make sure the work bowl and work bowl
cover are properly locked on the base.
See if the Food Processor is plugged
into a proper electrical outlet. If it is,
unplug the Food Processor.Then plug
into the same outlet again.
Model KFP750CR (Chrome):
Electrical Shock Hazard
Plug into a grounded 3 prong
outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these
instructions can result in death,
fire, or electrical shock.
Model KFP750 (All other colors):
Fire Hazard
Do not use an extension cord.
Doing so can result in death
or fire.
If the Food Processor still does not
work, check the fuse or circuit breaker
on the electrical circuit the Food
Processor is connected to and make
sure the circuit is closed.
• If your Food Processor should fail
to slice or shred when using
the disc:
Cut Hazard
Handle blades carefully.
Failure to do so can result in cuts.
Make sure the raised-blade side of the
disc is positioned face up on the disc
stem. The disc has a raised nub on the
top and grooves underneath to help
align it properly.
If your Food Processor lid won't
close when using the disc:
Make sure the disc is installed correctly,
with the raised nub on top, and is
positioned properly on the disc stem.
If the Food Processor shuts off
while it is running:
The Food Processor may be overheated.
If the motor exceeds a certain
temperature, it will automatically shut
off to prevent damage. This should
be an extremely rare occurrence. If it
happens, press the OFF Button and
wait 15 minutes for the Food Processor
to cool before resuming. If the Food
Processor still refuses to run, wait an
additional 15 minutes for the Food
Processor to cool.
If the problem cannot be corrected
with the steps in this section, see the
KitchenAid Warranty and Service section
on pages 29-31. Do not return the Food
Processor to the retailer they do not
provide service.
14