Parts And Components; Before Use; Product Assembly - cecotec ENERGYSILENCE AERO 350 Manual De Instrucciones

1. PARTS AND COMPONENTS

Fig. 1
1. Mounting bracket
2. Hanging ball
3. Downrod
4. Screws I
5. Canopy
6. Screws II
7. Clevis pin
8. Mounting plate
9. Motor
10. Screw and washer
11. Blades
12. Blade assembly disc
13. Screws III
14. Light base plate
15. Lamp bracket
16. Bulb holder
17. Glass shade

2. BEFORE USE

Take the product out of the box and remove all packaging materials.
Make sure all parts and components are included and in good conditions. If any sign of visible
damage is observed, contact immediately with our official Technical Support Service.
Carefully open the ceiling fan's box, take all the components out and place them on a cloth or
soft surface to avoid damage. Do not lay the motor's box on its sides, the housing could be
damaged. Before starting the assembly, make sure all the parts and components are included.

3. PRODUCT ASSEMBLY

Warning: To avoid electric shocks, turn the household power supply off before starting the
ceiling fan installation.
Remove the 4 screws that fix the canopy and the mounting bracket and separate these 2
pieces.
ENGLISH
ENERGYSILENCE AERO 350
25