Publicidad
Idiomas disponibles
Idiomas disponibles
EN
LOCAL CONFIGURATION MENU
LOCAL SETUP SUBMENU
This menu allows us to modify the gun identifier. These are
numerical values that must coincide with the value
configured in the U-track. Modify their value using the UP/
DOWN buttons.
- LOCAL SETUP -
HOSE NB.:
CALIBRATE SUBMENU
This menu allows you to calibrate the gun when it has a
calibrated container. To do this, we must dispense into a
measuring cup according to the following procedure:
1. Once inside the menu, enter the amount to be
dispensed (typically the amount indicated on the
container) by selecting the desired digit using the
LEFT/RIGHT buttons and changing its value using the
UP/RIGHT buttons.
2. Once the amount is set, press ENTER to confirm and
you will be prompted to confirm that you are not
pressing the trigger.
Make sure that the trigger is not pulled and press the
ENTER button below.
3. The pre-selected quantity is displayed and you can start
dispensing fluid into the container.
To ensure that you can make adjustments while dispensing,
a quantity equal to twice the value entered is preset
for safety.
10
105 277 R. 05/23
[ 1]
?
Alentec & Orion AB Grustagsvägen 4, SE-13840, Älta, SWEDEN · info@alentec.se · www.alentec.com
RF TEST SUBMENU
This menu allows us to obtain the RSSI transmission signal
value (in dBm) and to display it graphically in order to get
an idea of how good or bad is our signal.
- RF TEST -
RSSI: -52 dBm
CALIB.
SELECT QUANTITY
0
0
CALIB.
SELECT QUANTITY
0
0
CALIB.
RELEASE TRIGGER, OK?
CALIB.
0.00
0
.
0
2
.
0
001
4.00 L
Publicidad
