Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATION
EMERGENCY MODE
WHEN THE GUN IS STARTED, IT ATTEMPTS TO CONNECT
TO THE U·net PRO TO COMMUNICATE. IF THIS
CONNECTION IS UNSUCCESSFUL, THE GUN ENTERS
WHAT WE CALL EMERGENCY MODE.IN THIS MODE IT IS
NECESSARY TO ENTER AN EMERGENCY CODE THAT WILL
LOCAL CONFIGURATION MENU
Note: if we turn on the gun with the ENTER and CANCEL
buttons pressed simultaneously, we will also access the local
configuration menu.
This gun allows the following configurations:
•
LOCAL SETUP: allows setting local parameters
such as Hose ID.
•
RF TEST: allows the signal level to be checked.
•
CALIBRATE.
MENU NAVIGATION
Simultaneously press the ENTER and CANCEL buttons until
after about 3 seconds the setup menu access screen is
displayed and after a moment displays the setup options:
PRODUCT
SETUP
Alentec & Orion AB Grustagsvägen 4, SE-13840, Älta, SWEDEN · info@alentec.se · www.alentec.com
ALLOW US TO DISPENSE.THESE QUANTITIES ARE STORED
AND SENT AS "RACLEE" IN THE FIRST NORMAL OPERATING
TRANSACTION AFTER ENTERING EMERGENCY MODE.*IF
NEEDED, CONTACT US TO OBTAIN THIS CODE.
•
Pressing the UP/DOWN buttons allows navigation through
the various menu functions. To enter any of the submenus
press the ENTER button when the desired menu is selected.
001
EDIT PARAMS: allows you to edit operating
parameters such as calibration K-factor and
display orientation.
- SETUP MENU -
- LOCAL SETUP.
- RF TEST
- CALIBRATE
- EDIT PARAMS.
- EXIT
EN
9
R. 05/23 105 277
Publicidad
