Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATION
8. If dispensing is not interrupted, when the requested
amount is reached, the valve closes automatically and the
transaction end message is sent to the U-track, returning to
the initial state to enter the user again.
PRESET MODE OPERATION
Before dispensing, make sure that the gun is in this mode:
1. In the "ENTER USER PIN" screen, we enter the user by
using the UP/DOWN buttons to select the appropriate
digit or letter and the LEFT/RIGHT buttons to move
through the 50 possible characters that our USER PIN
could have.
To reset the user entered and start the process again,
press the CANCEL button.
To confirm the user press the ENTER button, which will
be sent to the U-track for validation.
If the user does not exist in the U-track database, we will
receive an error message and we will be allowed to enter
another user again.
2. Once the user has been validated, the U-track receives
the work orders associated with the product linked
to the gun.
Use the UP/DOWN buttons to move through the
available orders. If we press the CANCEL button, we will
go back to the previous step to be able to modify the
user. Once the work order has been selected, we will
confirm it by pressing the ENTER button.
3. The quantity associated with the work order is then
displayed on the screen and confirmation for the
transaction start is requested.
To start the transaction press the ENTER button.
Alentec & Orion AB Grustagsvägen 4, SE-13840, Älta, SWEDEN · info@alentec.se · www.alentec.com
9. Finally, release the trigger if it was manually operated or
press it upwards and then let it return to its rest position if
you had used the locking button.
TEST
STANDARD MODE
ENTER USER PIN
1
PRODUCT
ERROR USER!
TEST
SELECT JOB
T1
TEST
2.55
001
001
?
001
ERROR
001
?
wo
1 - 1
001
OK?
R. 05/23 105 277
EN
7
Publicidad
