Domo DO1034A Manual De Instrucciones página 41

INSTALLATION
· Place the airco on a solid and stable floor, this way you will prevent
excessive noice and vibrations. Make sure that the floor is strong
enough to support the weight of the appliance.
· The appliance has small wheels for easy moving. Make sure only to
move the airco over a flat and level surface. Be careful when moving the
airco over carpet. Never roll the unit over an object.
· Place the unit near an earthed socket.
· Never place any object within 50 cm round the airco.
· The air outlet hose must be used in the "cool" mode. During the "fan" or
"dry" mode, you don't need to attache the air outlet hose.
· Make sure that the air outlet is brought out with the hose. Keep the
opening to the outside as small as possible so that no warm air from the
outside can come back inside.
· Make sure the air outlet hose isn't bend during use.
INSTALLATION WALL KIT
· Place the coupling of the air outlet hose on the end of the hose.
· Place the air outlet hose on the air outlet at the back of the appliance.
· Make an opening in the wall the size of the wall adapter.
· Place the wall adapter in the opening. Attach the wall adapter using the screws supplied.
· Place the coupling of the wall attachment on the other end of the air outlet hose.
· Attach the hose with coupling to the wall adapter.
www.domo-elektro.be
max 120 cm max 120 cm max 120 cm
min 30 cm min 30 cm min 30 cm
max 120 cm
min 30 cm
41
DO1034A