Domo DO1034A Manual De Instrucciones página 47

ERROR CODES
Following error codes can be displayed on your airco :
E1 : the sensor for the room temperature is not working. Turn off the unit and remove the plug from the
socket. Wait for 10 sec and plug the unit back in. Turn on the unit. When the error codes repeats, you need
to contact the after sales service.
E2 : The sensor of the dehumidifier doesn't work. Turn off the unit and remove the plug from the socket.
Wait for 10 sec and plug the unit back in. Turn on the unit. When the error codes repeats, you need to
contact the after sales service.
E4 : The display is not functioning properly. Remove the plug from the socket. Wait for 10 seconds. Plug
the unit back in. When the error codes repeats, you need to contact the after sales service.
P1 : The water tank is full. Connect the drain hose to the bottom drain and remove the water. When the
error codes repeats, you need to contact the after sales service.
ENVIRONMENTAL GUIDELINES
www.domo-elektro.be
This symbol on the product or on its packaging indicates that this product
may not be treated as household waste. Instead it must be brought to
the applicable collection point for recycling of electrical and electronic
equipment. By ensuring this product is disposed of correctly, you will help
prevent potential negative consequences for the environment and human
health, which could otherwise be caused by inappropriate waste handling of
this product. For more detailed information about recycling of this product,
please contact your local city office, your household waste disposal service or
the shop where you purchased the product.
The packaging is recyclable. Please treat the packaging ecologically.
47
DO1034A