Publicidad
Idiomas disponibles
Idiomas disponibles
Beforeyou moveyour ice makerinto its final location, it is importantto makesureyou
havethe properelectricalconnection.
A standardelectrical supply (115 VAC only, 60 Hz, 15 A), properly grounded in
accordance with National Electrical Code and local codesand ordinances,is required.
Theice makershouldalwaysbepluggedinto its own individualelectricaloutlet.
It is reconnnended that a separate circuit, servingonly your ice maker,beprovided.Use
receptacles t hat cannotbeturnedoffby a switchor pull chain.
The fuse(or circuit breaker)sizeshouldbe 15amperes.
Recommended
grounding
method
For your personal
safety, this appliance
must be grounded.
It is equipped
with a power
supply cord having a 3-prong
grounding
plug. To minimize possible
shock hazard,
the
cord must be plugged
into a mating
3-pronged
and grounding-type
wall receptacle,
grounded
in accordance
with
the
National
Electrical
Code
and
local
codes
and
ordinances.
If a mating wall receptacle is not available, it is the personal responsibility
of the
customer to have a properly grounded, 3-prong wall receptacle installed by a qualified electrician.
Leveling
the Ice Maker
It is important
for the ice maker to be leveled in
order to work properly.
Otherwise,
water may not
flow properly
through
the evaporator
(ice mold).
Ice
production
will be
less
than
normal,
and
operation
will be noisy.
The ice maker
can be
raised or lowered
by rotating
the plastic
sheaths
around
each
of the four rolling
casters
on the
bottom of the machine.
If you find that the surface
is not level, rotate the casters
until the ice maker
becomes
level. (See
illustration.)
You may need to
make
several
adjustments
to
level
it.
We
recommend
using a carpenter's
level to check the
machine.
up 'N
_
down
1. Place a carpenter's level on top of the ice maker to see if the machine is level
from front to back and side to side.
2. Adjust the height of the casters as follows:
Turn the leveling caster to the right to lower that side of the ice maker.
Turn the leveling caster to the left to raise that side of the ice maker.
You will find that the casters make it easy for one person to move the machine. This is
useful for cleaning and sanitizing the surface on which the ice maker is installed because
it allows you to move the unit and have easy access to the surface to be cleaned.
10
Publicidad
