Publicidad
Idiomas disponibles
Idiomas disponibles
Problem
Possible
Cause
Cubes are partially
formed or are
white at the
bottom.
Noise during
operation
The ice maker
stops suddenly
while making ice.
The body of the
ice maker is
electrified.
Scaling occurs
frequently
inside
the machine.
The ice maker
makes an alarm
sound regularly.
Not enough water in the
water trough.
The feet are not leveled and
locked.
Certain sounds are normal.
The electricity
is off.
The room temperature is
out of the stated range.
The ice storage bin is full of
ice.
The drainage tray on top of
the compressor
is full.
The grounding
line isn't in
the socket.
The hardness of the water is
too high.
The drainage tray on top of
the compressor
is full.
Probable
Correction
Check if the water supply pressure
is
below 15 psig.
Check water supply; filter may be
restricted.
Check for a water leak at the water
trough.
Level and lock the feet.
See "Leveling
the Ice Maker".
See "Normal
Sounds".
Reconnect
the power supply line.
Cut offthe
electricity;
let the ice maker
stop working until the temperature
returns within the stated range.
Remove
some ice cubes; make sure the
ice-full probe is free of ice.
Drain offwater
by unscrewing
lower
drainage nut.
Use a socket meeting the required
electrical standard.
Use a water-softening
device installed
in front of the water inlet.
Drain off water by unscrewing
lower
drainage nut.
25
Publicidad
