Publicidad
Idiomas disponibles
Idiomas disponibles
During charging, tapping the centre button scrolls through
the screens, displaying:
- Current charging current.
- Battery voltage.
- Ampere-hours (Ah) stored
by the battery since the start
of the current charge.
- Estimated percentage
of charge
Some Polar Mars Series charger models deactivate the display
backlight after 10 minutes of inactivity on the touch buttons.
To reactivate the backlight, touch the centre button.
During charging, the charger will automatically charge the battery
according to the set charging curve.
If you want to interrupt charging before the charging
the process is complete, you must put the charger
in a STOP state before disconnecting the battery
(to prevent damage to the connector's electrical
contacts).
To put the charger in STOP state, press and hold
the left button for 3 seconds.
STOP will appear on display and the battery can
be safely disconnected from the charger.
17.
Publicidad
