Publicidad
Idiomas disponibles
Idiomas disponibles
When the end of the charge is reached, the display
will indicate 100% charge and show 'Floating'.
In the Floating phase, the battery is considered
charged and can be disconnected anytime.
During the Floating phase, the charger becomes
a charge maintainer and will prevent the battery
from self-discharging as long as it is connected to the battery.
Power Supply mode - use of as stabilised power supply.
If the charger has been programmed as Power Supply,
it will function as a stabilised power supply.
When switched on, the charger shows the set
voltage on display.
It is possible to change the voltage using
the central button
between two preset voltages
(e.g.12V / 24V or 36V / 48V).
To start the power supply, press and hold the right
button
for 3 seconds.
To interrupt, press the right button for 3 seconds.
, typically choosing
Voltage
24V
27.6 V
5.8 A
18.
Publicidad
