USA
Cleaning, care, and storage
Cleaning, care, and storage
NOTICE!
Improper cleaning!
If you do not clean the pressure cooker properly, you could
damage it or parts of it.
− Clean the pressure cooker after each use.
− Do not use any aggressive cleaners such as alkaline or
chlorine-based cleaners and do not use sharp or metallic
cleaning utensils such as knives, hard scrapers or similar.
− Use lemon or vinegar to remove stains from the bottom of
the pot.
− Do not in any case put the lid in the dishwasher.
Cleaning the pressure cooker
1. Let the pot
7
insert stand
20
2. Take the sealing ring
3. Clean the pot, the lid, the stewing insert, and the insert stand with hot water
and liquid detergent or put the pressure cooker, the stewing insert, and the
insert stand in the dishwasher without the lid.
4. Clean the sealing ring, the safety valve
as described in the chapters "Cleaning and replacing the sealing ring" and
"Cleaning the valves".
5. Let all parts dry completely.
Cleaning and replacing the sealing ring
1. Wipe the sealing ring
2. Let the sealing ring dry completely.
3. Put the sealing ring back in the lid
4. In the event of normal use of the lid, replace the sealing ring once a year, but
no later than when it has become hard or dark.
20
tm3service@outlook.com
, the lid
12
as well as the stewing insert
cool off completely.
out of the lid (see fig. B).
17
off and rinse it under running water (see fig. B).
17
2
, and the pressure control valve
(see fig. B).
12
19
and the
AFTER SALES SUPPORT
1-877-386-8264
USA
16