Trumpf TruTool S 160 Traduccion Del Manual De Instrucciones Originale página 13

1.3 Symbols
The following symbols are important for
reading and understanding the operator's
manual. The correct interpretation of the
symbols helps to operate the power tool
properly and safely.
Symbols Description
Type of shears, e.g.
S 160
TruTool S 160 (2A5)
(2A5)
Power tool with rechargeable bat-
tery
Power tool with power cable
Power tool with speed controller
Inspection
Check charge of rechargeable
battery
Loosen the hexagon-head screw
slightly
Loosen / tighten the hexagon-
head screw
Lubrication
Read operator's manual
Disposal/recycling of old devices
and batteries
Li-ion
Translation of the original operator's manual
1.4 Warnings in this document
Warnings warn about dangers that can occur
when handling the power tool. They come in
four danger levels that can be distinguished
by the signal word:
Signal word Meaning
DANGER Indicates a danger with high
risk, which can cause death
or severe injuries if it is not
avoided.
WARNING Indicates a danger with
medium risk, which can
cause severe injuries if it is
not avoided.
CAUTON Indicates a danger with low
risk, which can cause minor
or moderate injuries if it is not
avoided.
ATTENTION Indicates a danger that can
cause property damage.
1.5 Proper use
TRUMPF shears are hand-guided power
tools for the following applications:
– Slitting and trimming plate-shaped work-
pieces made of steel, aluminum, plastic,
etc.
– Slitting straight or curved outer edges
and interior cut-outs
– Slitting after marking
EN
13