EN
6 Repair
Service, changing, and inspection of power
tools must be done properly.
The safety regulations according to DIN
VDE, CEE, AFNOR, and other regulations
valid in individual countries must be adhered
to.
If a connection line must be replaced, have
this repair done by the manufacturer or its
representative to avoid safety hazards.
7 Declaration of conformity
We declare in our sole responsibility that this
product conforms to all relevant require-
ments with regard to the following guidelines,
standards, and standardizing documents:
– 2006/42/EC
– 2014/30/EU
– 2011/65/EU
– EN 62841-1
– EN 62841-2-8
Signed for the manufacturer and in the name
of the manufacturer by:
Dr. Thomas Schneider
Development Manager
TRUMPF Werkzeugmaschinen SE & Co. KG
DE-71254 Ditzingen, Germany
Ditzingen, 07/07/2023
20
Translation of the original operator's manual
8 Warranty
For TRUMPF power and compressed-air
tools, there is a liability period of 12 months
from the invoice. Damage that is due to natu-
ral wear, overload or improper handling of
the tool is excluded from the warranty. Dam-
age that arises due to material or manufac-
turer errors will be remedied free or charge
through delivery of a substitute or repair.
Complaints can only be recognized if the de-
vice is sent assembled to your TRUMPF rep-
resentative.
9 Disposal of old power tools
and electronic devices
Li-ion
Power tools, rechargers, batteries/recharge-
able batteries, accessories, and packaging
may not be disposed of in household
garbage. They must be recycled in an envi-
ronmentally compatible manner. Here, the
applicable national regulations must be
heeded.
Before environmentally-compatible recycling/
disposal of the batteries/rechargeable batter-
ies, the contacts must be secured with tape
against short-circuiting, and the batteries/
rechargeable batteries in a power tool must
be discharged. Defective or spent batteries/
rechargeable batteries must be returned to
the sales offices of TRUMPF power tools.