Tower Installation - Eaton 9PX8KSP Manual De Instalación Y Usuario

4. Installation for EBM(s)
4.5

Tower installation

If you ordered other UPS accessories, refer to specific user manuals to check the tower installation
with the UPS.
To install the cabinet:
1. Place the UPS on a flat, stable surface in its final location.
2. Always keep 150 mm of free space behind the UPS rear panel.
3. If installing additional cabinets, place them next to the UPS in their final location.
4. Install mounting brackets to attach the EBM to UPS module.
Page 18
614-00205-01_EN