Publicidad
Idiomas disponibles
Idiomas disponibles
IV. MOBILITY BASE USE &
D. Installation of x:panda
WARNING: Improper installation of the x:panda onto the Tyke mobility base may cause
the x:panda to disconnect from the mobility base and fall from the frame which could
result in serious injury or death.
1. Determine if the Tyke has been set up in a Forward or Reverse seating configuration.
Fig. 9
2. Place the rear of the x:panda base on the rounded end of the adapter plate. Pull and hold the
locking pin out on the adapter plate and slide the x:panda seat fully until the seat stops sliding
and rear of the adapter plate is no longer visible.
Fig. 10
CONFIGURATION
16
Publicidad
