Publicidad
Idiomas disponibles
Idiomas disponibles
IV. MOBILITY BASE USE &
G. Adjusting Suspension
The suspension can be adjusted continuously according to the user's weight and the conditions of
the road/surface:
1. Twist the adjustment rings on both sides of the frame equally (Fig. 15:A).
NOTE: Turning the adjustment rings CLOCKWISE will make the suspension TIGHTER.
Turning the adjustment rings COUNTERCLOCKWISE will make the suspension SOFTER.
2. Ensure the adjustment rings are in the same position on both sides. The four marks can be
used for orientation (Fig. 15:B and Fig 16:A).
Fig. 15
The chart below shows the recommended settings for the spring tension:
User Weight
Up to 22 lbs (Up to 10 kg)
Up to 44 lbs (Up to 20 kg)
Up to 66 lbs (Up to 30 kg)
Up to 88 lbs (Up to 40 kg)
*Reference Point: Upper edge of the plastic adjustment nut. Reference Fig. 9.
H. Front Wheels with Integrated Swivel Lock
The Tyke can be equipped with swiveling front wheels to make steering easier and increase
directional stability on uneven ground. If needed, the caster wheels can be locked with the
integrated swivel lock.
Activating the Caster Swivel Lock
1. Pull the caster swivel lock casing forward (Fig. 17).
2. Push the mobility base forward until the caster wheels click audibly into the lock casings.
Deactivate the Caster Swivel Lock
1. Push the caster swivel lock casing towards the seat (Fig. 17) to release the caster wheels.
CONFIGURATION
B
A
Fig. 17
Fig. 16
Up to 1st marking from the top
Up to 2nd marking from the top
Up to 3rd marking from the top
Up to 4th marking from the top
19
A
Marking*
Publicidad
