Publicidad
Idiomas disponibles
Idiomas disponibles
IV. MOBILITY BASE USE &
E. Adjusting the Push Bar
The push bar can be adjusted to the desired height:
1. Press both buttons on the setting joints on both sides at the same time (Fig. 13:A).
2. Move the push bar to the desired position (Fig. 13:B).
3. Release the buttons.
4. Move the push bar up or down slightly until the joints click audibly into place.
F. Using the Wheel Lock
The wheel lock should be used when getting in or out of the mobility base and on uneven
ground. To engage the wheel lock:
1. Press the brake down with the tip of your foot (Fig. 14).
2. To disengage, pull the brake bar up with the tip of your foot (Fig. 14).
Fig. 14
CONFIGURATION
Fig. 13
Engage
Disengage
B
A
18
Publicidad
