Publicidad
Idiomas disponibles
Idiomas disponibles
TROUBLESHOOTING
Information Code
Description
Possible Causes
Solution
The command zone switches off due
The temperature inside the
Wait for the hob to cool
to an excessively high temperature
electronic parts is too high
before reusing it
Water, pots or kitchen tools
Clean the surface, remo-
Continuous (permanent) key ac-
tivation is detected. The interface
are on top of the user inter-
ve any objects from the
+
switches off after 10 seconds.
face.
surface.
Acoustic signal
For all other error signals
Call customer service and report the error code
(E...U...)
CUSTOMER SERVICE
Before contacting Customer Service
1. Check that you cannot solve the problem yourself based on the points described in "Troubleshooting".
2. Switch the device off and on again to see if the problem resolves itself.
If the fault persists after the above checks, contact the nearest Customer Service.
Induction hob: ENF430BL / ENF436BL
Rated Voltage: 220 V~
Frequency: 60 Hz
Power consumption: 7.7 kW
Current consumption: 34.5 A
Content: 1 piece.
Made in Mexico
Manufactured by: ELICAMEX S.A. de C.V.
Address: Av. La Noria (Prolongación) No. 102,
Col. Ampliación Parque Industrial Querétaro,
Santa Rosa Jáuregui, C.P. 76215, Querétaro, México.
R.F.C. ELI060102RK8
18
Publicidad
