Nordcap Moretti T98G Manual Del Usuario página 45

TT98G Turn the knobs to adjust panel mounting on the lower and
upper blowers and turn the knobs on both sides of the oven (fig. 17
item (C); each knob sets the corresponding half oven on its side. Turn
from 1 to 5 as desired; the setting commissioned by the
manufacturer is at 1 corresponding to the maximum lower and
upper opening setting and 2 to 5 regulate air flow as follows:
1: ++ above ++ below
2: ++ above -- below
3: + above -below
4: - above + below
5: -- above ++ below
3.6 START-UP
WARNING!
IF YOU SMELL GAS:
- DO NOT USE ANY SWITCH OR ELECTRICAL DEVICE
BECAUSE IT COULD TRIGGER AN EXPLOSION.
- PRESS THE EXTERNAL MANUAL TAP NEXT TO THE GAS
METER TO STOP GAS SUPPLY.
- CALL THE GAS SUPPLIER IMMEDIATELY,
OTHERWISE CALL THE FIRE BRIGADE.
- VENTILATE THE PREMISES IF POSSIBLE IN SAFE
CONDITIONS.
WARNING!
- Never allow unauthorised persons to approach the oven.
- Take particular care never to touch moving parts with your arms,
hair, bracelets, rings, tools, clothing, etc. or with any parts that
might become hooked up, because in spite of the low speed at which
the conveyor belt turns there is a risk of being dragged and crushed
by movement of the belt itself.
- In particular, bear in mind that the glass in the front door (if
present), the adjustable side walls and the conveyor belt heat up
when the oven is in use, and must never be touched to avoid
burning; when a number of chambers are fitted on top of each
other, the upper chambers may heat up, so you should never touch
the outer walls to avoid burning. The two parameters to set for
cooking are: the temperature and the cooking time (production process
time in the cooking chamber, directly dependent on the conveyor belt
speed ).
To determine the temperature and optimal cooking time, set one
variable at a time; temperature is raised to increase browning and time
increased to prolong cooking.
It is possible to store up to 100 different cooking programs (T64G 20
programs), which can be called up and/or modified at any time.
One of the various functions is "Eco standby" or, energy saving;
and "Lock" should be enabled during the pause when cooking.
This function allows you to enter a series of password operations to be
used for cooking even by unskilled staff.
The "ignition Timer" is not enabled for the gas oven.
3.6.1 SETTING LANGUAGE AND ° C/° F
To set language (Italian, English, French,
German and Spanish etc.) see section 3.6.15.
The control unit can be set to display temperature in Centigrade or in
Fahrenheit. To change setting see section 3.6.16.
3.6.2 THE DISPLAY
T75G-TT98G
The appliance is started by pressing the start-up button (fig. 29. item R).
A screen like the one shown in Fig. 30a appears after a few seconds
when the dashboard is switched on.
TT98G: If the 2-temperature display mode is enabled, follow
instructions described in 3.6.13 to set display mode at 1 temperature!
NOTE:
If you press the mushroom emergency button, (fig. 29
item O), it locks in the safety position and does not enable the
appliance to be, switched on; turn anti-clockwise to unlock .
With reference to Figure 30a in the display, the following can be
identified:
1) set point temperature/temperature detected
2) cooking time (production processing in the oven)
3) explanatory status messages
4) indication of the oven status (idle/heating/cooking)
5) working mode status (Manual, Program, Stand-by)
6) "Start Timer" status (not available for gas ovens)
7) "Conveyor belt Lock" status
8) "Step" status
9) "Lock" status
The oven's image appears at the center of the screen. The set-point
temperature is displayed in red above this image, to the right of which
is the icon of a flame representing the burner's status: the broken flame
indicates that the burner is off and the coloured flame indicates that the
burner is on or powering up.
TT98G: Since the oven is provided with two burners, there are 2
flames displayed; positioned on the left and right of the set point
temperature, they indicate the status of the oven's left and right burner
(fig. 30b).
To the right of the central image of the oven is an indication, in red, of
the cooking time below which generic messages are indicated such as
date, time, oven model, oven status, etc ...inside a red label.
To the left of the screen starting from the top is the oven's status icon
represented by a gray lightning bolt indicating that the oven is off; it
turns red when the oven is heating and green when the oven is ready
for cooking. Below, the working mode icon, is represented by 'M' If
the manual mode is enabled, by 'P ' If a cooking program is enabled or
the symbol of a money box if "Eco standby" is enabled. The "Start
Timer", "Conveyor belt Lock" and "Step" status icon turn gray if the
key is disabled and orange if the key is enabled. The unlocked
padlock icon indicates that the "Lock" key is disabled; it switches to a
closed padlock icon in orange if the key is enabled.
T64G (fig.31b):
The oven is turned on by setting the main switch (fig.31b item E) to
position "1".
When turned on, the control panel will identify the following settings:
A- baking chamber inside temperature
B- set temperature (Set Point)
C- set cooking time
D- status display, for displaying the status of the equipment or of any
abnormalities detected
3.6.3 THE KEYPAD
T75G-TT98G (fig. 31)
The buttons on the control panel are the following (its use will be
explained below:
10) -: decrease parameter
11) +: increase parameter
↑ and ↓ : "Up/Down" arrow keys
12)
13) Access to menu settings ("Menu")
14) Program management P ("Program")
15) Ok confirm
16) Delete, go back without confirming ("Return")
17) Ignition ("Start")
18) Off ("Stop")
19) Enable/disable Eco Standby function ("Stand-by")
20) Custom key ("Hotkey")
NOTE:
LCD not TOUCH SCREEN. If the display is pressed,
this can cause permanent damage which may stop the oven from
functioning properly.
T64G(fig.31b):
The keys to the right of the display (details of their uses will be given
later in the manual) are the following:
12) up arrow / +
13) down arrow / -
14) right arrow
15) left arrow
16) OK button
17) Start/Stop button
18) program key P/Hotkey
19) Eco Stand-by key
20) Lock button
3.6.4 OVEN START-UP
When switched on, the control panel will first show the initial screen
complete with the settings for the last baking operation carried out
(T75G-TT98G fig.30, T64G fig. 31b).
T75G-TT98G
The operating mode icon indicates the previous cooking mode manual
("M") or program set or ("P").
Press STA RT (fig. 31 item17 to operate the oven after a few seconds
the fan inside the oven and burner is activated. The temperature icon
starts to alternate the red set-point temperature displayed with the
gauged white temperature; the icon representing the flame status is
UK/8