Cebora SYNSTAR 350 TS Manual De Instrucciones página 67

11 TECHNICAL SPECIFICATIONS
Provided the impedance of the public low-voltage network at the point of common coupling (PCC) is lower than the
Zmax value indicated in the tables below, this unit complies with IEC 61000 3-11 and IEC 61000 3-12 and can be
connected to low-voltage networks.
It is the responsibility of the installer or user of the unit to ensure, by contacting the distribution network provider if
necessary, that the network impedance is in compliance with the impedance restrictions specified.
The tables below show the technical data of the power sources for welding processes that can be used in manual
mode (MIG/MAG and MMA) and in the field of automation (MIG/MAG only).
SYNSTAR 350 TS Item No� 379
Mains voltage (U1)
Mains voltage tolerance (U1)
Mains frequency
Mains fuse (delayed action)
Apparent power
Mains connection Zmax
Power factor (cosɸ)
Welding current range
Welding current 10 min/40°C (IEC 60974-1)
Open-circuit voltage (U0)
Usable electrodes
Max. gas inlet pressure
Performance
Idle state power consumption
Electromagnetic compatibility class
Overvoltage class
Degree of pollution (IEC 60664-1)
Degree of protection
Cooling type
Working temperature
Transport and storage temperature
Marking and Certifications
Dimensions (WxDxH)
Net weight
Motor generator power required: greater than or equal to 30 kVA.
3301291 3301291-EN
MIG
3 x 230 V 3 x 400 V
28 A 16 A
13.3 kVA 40%
12.2 kVA 60% 14.2 kVA 60%
11 kVA 100% 10.8 kVA 100% 11 kVA 100%
60 mΩ
10 ÷ 340 A 10 ÷ 350 A
340 A 40%
320 A 60% 350 A 60%
300 A 100% 300 A 100%
63 V 55 V
6 bar / 87 psi
527 mm x 1078 mm x 1398 mm
MMA
3 x 230 V
+15% / -20%
50/60 Hz
28 A
13.6 kVA 40%
12.3 kVA 60%
0.99
10 ÷ 320 A
320 A 40%
300 A 60%
280 A 100%
63 V
Ø 1.5 – 6.0 mm
86%
33 W
A
III
3
IP23S
AF
-10 °C ÷ 40 °C
-25 °C ÷ 55 °C
CE UKCA EAC S
95 kg
3 x 400 V
16 A
14.2 kVA 60%
10.6 kVA 100%
60 mΩ
10 ÷ 330 A
330 A 60%
280 A 100%
55 V
67