Descargar Imprimir esta página

EAS ELECTRIC EMW1056GW Manual De Instrucciones página 46

Publicidad

Idiomas disponibles

Idiomas disponibles

QUICK START GUIDE
CAUTION
• Before washing, please make sure the machine is installed properly.
• Your appliance was thoroughly checked before it left the factory. To remove any
residual water and to neutralize potential odors, it's recommended to clean your
appliance before first use. For this reason, recommended to clean the inner drum
by running the "Drum Clean" or other program with the optional temperature of
90°C.
Be careful not to put laundry and detergent in the machine.
Calibration
It's recommended to calibrate the machine, so that provide the best performance.
The appliance is able to detect the amount of laundry loaded. This function is
optimizing the product performance by minimizing energy and water
consumption, saving you money and time. For this reason it's recommended to
calibrate the appliance for best use.
1- Remove all accessories from the drum and close the door;
2- Insert the mains plug to the socket;
3- Switch on the washing machine, and within 10 seconds, press "Centrifug."
continuously (normally 3 seconds) until "t19" is displayed on the knob.
4- Press
to start the appliance, initially "---" is displayed, and then
"***" (such as "126") is displayed to indicate the real time drum speed.
When the number reaches a certain value (stop changing), it means the
washing machine is successfully calibrated.
9
V.1

Publicidad

loading

Este manual también es adecuado para:

Emw1256gw