Centrifug.
When needed, the spinning speed can be adjusted pressing the Centrifug.
button in the following steps: 1400:0-400-600-800-1000-1200-1400
Delay
1. Select a programme.
2. Press the Inicio diferido/Início retardado button to choose the delaying
time 0-24H.
3. Press Inicio/Pausa to start the delay operation.
Choose programme
To cancel the Delay function, press the "Inicio diferido/Início retardado" button before
starting the program until the display shows 0 H. If the program has already started,
switch the appliance off and afterwards on and select a new programme.
Pre Wash
Extra washing function before the main washing cycle starts to increase
the washing performance.
Note: Detergent needs to be added to the compartment I.
Extra Rinse
The laundry will undergo an extra rinse after selecting this
function.
Strong Wash
Very dirty clothes can choose it, select it can increase the washing
time and intensity to increase the washing effect.
HYGIENE FUNCTION
When the Hygiene Function light is on, this function is automatically
activated in the program. The drum cleaning function will be
automatically activated during every washing cycle. Hygiene Function
system will keep your laundry always clean.
Temp.
When needed, the washing temperature can be adjusted by pressing the
temperature button in the following steps:
Cold -20°C-30°C - 40°C- 60°C - 90°C.
NOTE
Usage counter
1. Unplug the equipment for 10s and reconnect again.
2. Power on and within 10s, please press "Centrifug." and "Función/Função" on
control panel simultaneously and continuously for around 5s until the device
display shows digits--the value can indicate the times of equipment usage.
3. Repeat step 1 again and customer can resume to normal operation.
Setting time
27
Start
V.1