Dreame VPD1 Manual De Usuario página 11

Care & Maintenance
EN
Cleaning the Soft Roller Brush Bar
1. Push the brushbar head release button
in the direction of the arrow until the cover
of the brushbar head pops to open, then
remove the brushbar head by lifting it in
the direction indicated.
Note: Use small tools to pry the clip away.
3. Remove the pre-filter. Rotate the cyclone
assembly slightly to remove from the dust
bin.
16
2. Use scissor to cut off the hairs and fibers
that stick on the roller brush. Wipe the dust
from the notch and transparent cover with
a dry cloth or paper towel.
4. Rinse the cyclone assembly, pre-filter,
and dust bin until they are clean. After
washing, air dry for at least 24 hours .
12
11 1
10 2
24 hrs
9 3
8 4
7 5
6
Specifications
Vacuum Cleaner
Model VPD1
Rated Power 350 W
Charging Time Approx. 2.5 hours
Soft Roller Brush Bar
Model
Rated Power
Rated Voltage
Power Adapter
Model YLS0251B-E300080
Output 30 V 800 mA
Efficiency at Low
78.66 %
Load (10%)
Rechargeable Lithium-Ion Battery Pack
Model P2013A-7S1P-SCA
Nominal Voltage 25.2 V
The lithium-ion battery pack contains substances that are hazardous to the environment.
Before disposing of the vacuum, please first remove the battery pack, then discard, or
recycle it in accordance with local laws and regulations of the country or region it is used in.
Charging Voltage 30 V
Rated Voltage 25.2 V
Nominal Capacity 2000 mAh
AVB11
40 W
25,2 V
100-240 V~50/60 Hz
Input
0.8 A Max
Average Active
88.53 %
Efficiency
No-load Power
0.09 W
Consumption
Nominal Capacity 2000 mAh
Energy 45.36 Wh
EN
17