Publicidad
Idiomas disponibles
Idiomas disponibles
Care & Maintenance
EN
3. Remove the pre-filter. Rotate the cyclone assembly slightly to remove from the dust
bin.
1
2
4. Rinse the cyclone assembly, pre-filter, and dust bin until they are clean. After washing,
air dry for at least 24 hours .
Note:
• It is recommended to clean the dust bin once every month.
• It is recommended to clean the cyclone system and pre-filter at least once every 3 to 4
months.
12
Pre-Filter
Cyclone Assembly
Dust Bin
12
11
1
10
2
24 hrs
9
3
8
4
7
5
6
Care & Maintenance
Installing Dust Bin Assembly
1. Install the cyclone assembly and pre-filter into the dust bin.
Note: Make sure all filters are completely dry before re-installing.
2
1
2. Align the slots on the dust bin with the notches on the vacuum. Pull down the dust bin
until you hear a click.
Pre-Filter
Cyclone Assembly
Dust Bin
2
Click
EN
13
Publicidad
