Publicidad
Idiomas disponibles
Idiomas disponibles
Auxiliary Handle
(Fig. 6)
The tool must be supported with the auxiliary
handle 18, which can be swiveled 360˚.
To reposition and/or swivel the handle, loosen
the hand grip, move the handle to the desired
position along the barrel and securely retighten
the hand grip.
Depth Gauge
(Fig. 7)
Your drilling depth can be pre-set and/or repeat-
ed by using the depth gauge.
Setting depth: After the auxiliary handle is in-
stalled, make sure the accessory has been fully
inserted into the tool holder 2 before setting the
depth gauge 19.
To adjust depth, push the depth gauge release
button 17, slide the depth gauge 19 to desired
depth and release pressure on button to lock
the depth gauge in place.
Inserting the Bluetooth® Low Energy
Module GCY 42 (Accessory)
Read the corresponding operating instructions
for information about the Bluetooth® Low En-
ergy Module GCY 42.
160992A8B9 GBH18V-28C 20230316.indd 14
Assembly
Fig. 6
Fig. 7
-14-
(18)
(19)
(2)
(17)
X
3/16/23 4:08 PM
Publicidad
