Kärcher WD 7.2 Serie Manual Del Usuario página 14

Safety instructions
This device is not intended for use by
–
persons (including children) with re-
duced physical, sensory or mental abil-
ities or lacking experience and/or
knowledge, unless they are supervised
by a person responsible for their safety
or are instructed by these persons on
the use of the device. Children should
be supervised, to ensure that they do
not play with the device.
Keep packaging film away from children
–
- risk of suffocation!
Switch the appliance off after every use
–
and prior to every cleaning/mainte-
nance procedure.
Risk of fire. Do not vacuum up any burn-
–
ing or glowing objects.
The appliance may not be used in areas
–
where a risk of explosion is present.
Electrical connection
The appliance may only be connected to al-
ternating current. The voltage must corre-
spond with the type plate on the appliance.
Risk of electric shock
Never touch the mains plug and the socket
with wet hands.
Always hold the plug rather than the cable
when disconnecting the power cord.
Check the power cord with mains plug for
damage before every use. If the power cord
is damaged, please arrange immediately
for the exchange by an authorised custom-
er service or a skilled electrician.
To avoid accidents due to electrical faults
we recommend the use of sockets with a
line-side current-limiting circuit breaker
(max. 30 mA nominal tripping current).
Caution
Certain materials may produce explosive
vapours or mixtures when agitated by the
suction air!
Never vacuum up the following materials:
Explosive or combustible gases, liquids
–
and dust particles (reactive dust parti-
cles)
14
Reactive metal dust particles (such as
–
aluminium, magnesium, zinc) in combi-
nation with highly alkaline or acidic de-
tergents
Undiluted, strong acids and alkalies
–
Organic solvents (such as petrol, paint
–
thinners, acetone, heating oil).
In addition, these substances may cause
the appliance materials to corrode.
Description of the Appliance
Illustrations on fold-out
pages!
 These operating instructions describe
the basic models of the Multi-Purpose
Vacs shown on the front cover.
 Depending on the model, there are dif-
ferences in the equipment and included
accessories.
When unpacking the product, make sure
that no accessories are missing and that
none of the package contents have been
damaged. If you detect any transport dam-
ages please contact your dealer.
included in the scope of delivery
possible accessories
Suction hose connection
To connect the suction hose during vacu-
uming.
Note: In order to disconnect it, push down
with your thumb and pull the suction hose
out.
Machine socket
To connect an electric tool.
Note: Observe the maximum connected
power (see Chapter "Specifications").
Blowing connection
Connect the suction hose to the blower
connection, this will activate the blower
function.
EN
– 8