SICK GSE6V Manual De Instrucciones página 19

2 Safety information
2.1 Safety notes
2.2 Intended use
3 Product description
3.1 Operating and status indicators
8021852.1HTG/2022-11-11 | SICK
Subject to change without notice
Read the operating instructions before commissioning.
■
■
Connection, mounting, and setting may only be performed by skilled per‐
son.
■
NO
2006/42/EC
Not a safety component in accordance with the EU Machinery Directive.
SAFETY
■
When commissioning, protect the device from moisture and contamination.
These operating instructions contain information required during the life cycle of
■
the sensor.
The GSE6V is an opto-electronic through-beam photoelectric sensor (referred to as
"sensor" in the following) for the optical, non-contact detection of objects, animals, and
persons. A sender (GS) and a receiver (GE) are required for operation. If the product is
used for any other purpose or modified in any way, any warranty claim against SICK AG
shall become void.
OPERATING INSTRUCTIONS
O P E R A T I N G I N S T R U C T I O N S | GSE6V
en
19