Publicidad
Idiomas disponibles
Idiomas disponibles
GB | Thermo-hygrometer
The thermometer shows time, calendar, indoor temperature and humidity.
It has a memory of the minimum and maximum values and an alarm clock with a snooze function.
Read this manual carefully before you start using the product.
Technical specifications
Quartz controlled clock
Indoor temperature range: 0–50 °C
Temperature resolution: 0.1 °C
Indoor humidity resolution: 20–90 %
Resolution and precision of humidity measurement: 1 %, ±5 %
Power supply: 1× 1.5 V AA
Dimensions and weight: 93 × 93 × 37 mm, 109 g (w/o batteries)
Buttons
SNOOZE•LIGHT
MODE
UP
MEM
C/F
RESET
Battery installation
1. Open the battery lid on the rear side of the thermometer.
2. Insert 1× 1.5 V AA batteries into the thermometer. When inserting the batteries, follow the proper
polarity. Use only alkali batteries of the same type. Do not use rechargeable batteries. Dispose of
the used batteries ecologically in accordance with the legislation of your country.
3. Close the battery cover.
Setting the time
1. Hold the MODE button. The hours will start flashing.
2. Use the UP button to change the values: Minutes – hours – 12/24 h format / month / day.
3. Navigate among the values by a short push of the MODE button.
Push
Activate snooze/display backlighting
Alarm clock time
Show the date / alarm clock
activation / one step forward
Show the max/min measured values
Show temperature units in °C/°F
Erase all values
Setting the alarm clock, time, date,
Erase all measured values
2
Hold
12/24 h
Publicidad
