Descargar Imprimir esta página

Emos E0114 Manual De Instrucciones página 3

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 37
Indoor temperature and humidity, temperature units
Indoor temperature is displayed in the top half of the thermometer.
Indoor humidity is displayed in the bottom half of the thermometer.
Push the C/F button to toggle the temperature units - °C or °F.
Maximum and minimum values of temperature and humidity
Push MEM button repeatedly to display the maximum and minimum measured values of temperature
and humidity.
Hold MEM button to reset the memory of measured values.
Display the date
In the time display mode push the UP button to display the current date for 3 seconds.
Setting the alarm clock
1. Push the MODE button to activate the alarm clock setting mode.
2. Hold the MODE button for 2 seconds. The minutes will start flashing.
3. Use the UP button to change minutes, then confirm with the MODE button.
4. Use the UP button to change hours, then confirm with the MODE button.
Alarm clock activation is signalled with the bell icon
Push the UP button again to show the icon
When this icon is on display, every full hour 2× beeps will sound as a notice.
By another push of the UP button you cancel the alarm clock activation or notice about full hours.
The icons will not be displayed.
Snooze function
1. When the alarm clock is ringing, push the SNOOZE button. It will temporarily suspend the ringing
and activate the SNOOZE function. The alarm clock will ring again in 8 minutes.
2. To cancel the SNOOZE function, push any button on the rear of the thermometer, when the alarm
clock is ringing (except SNOOZE).
Backlighting
Push the LIGHT button to activate backlighting of the display for 5 seconds.
Care and maintenance
The product is designed so that with proper use it can serve reliably for many years. There are several
guidelines for correct operation:
• Before you start using the product, read the user manual carefully.
• Do not put the product in locations prone to vibrations and shocks – it could damage the product.
• Do not put the product under excessive pressure, shocks, dust, high temperature or moisture – it
might harm the product functionality, damage the batteries or deform the plastic components.
• Do not place any sources of open fire on the product, such as a burning candle.
• Do not put the product in places with insufficient airflow.
• Do not interfere with the internal electric circuits of the product – you can damage it and render
the warranty invalid. The product should be repaired only by qualified professionals.
• Clean with soft wet cloth. Do not use solvents or cleaning detergents – they might scratch the
plastic elements and damage the electric circuits.
• Do not submerge the product under water or other liquid.
• If the product is damaged or malfunctioning, do not repair it on your own. Have it repaired in the
shop, where you bought it.
• Keep the product out of reach of children. It is not a toy.
• Remove flat batteries. They might leak and damage the product. Use only new batteries of the
recommend type and follow proper polarity when replacing them.
• Do not throw the batteries into fire, do not dismantle them or short-circuit them.
This appliance is not to be used by persons (including children), whose physical, sensory or mental
incapacity or lack of experience or knowledge prevents them from safe use of the appliance, unless
.
.
3

Publicidad

loading