Descargar Imprimir esta página

Grizzly Tools AHS 2020 Traduccion Del Manual De Instrucciones Originale página 52

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 133
GB
General safety instructions for
power tools
WARNING! Read all safety direc-
tions and instructions. Omissions
in the compliance with safety direc-
tions and instructions can cause
electrical shock, fire and/or severe
injuries.
Retain all safety directions and instruc-
tions for future use.
The term "Power Tools" used in the safety
instructions refers to mains-operated pow-
er tools (with power cord) and to battery-
operated power tools (without power cord).
Work area safety
Keep work area clean and well lit.
Cluttered or dark areas invite acci-
dents.
Do not operate power tools in ex-
plosive atmospheres, such as in the
presence of flammable Iiquids, gas-
es or dust. Power tools create sparks
which may ignite the dust or fumes.
Keep children and bystanders away
while operating a power tool. Dis-
tractions can cause you to lose control.
Electrical safety
Power tool plugs must match the
outlet. Never modify the plug in any
way. Do not use any adapter plugs
with earthed (grounded) power
tools. Unmodified plugs and matching
outlets will reduce risk of electric shock
Avoid body contact with earthed or
grounded surfaces, such as pipes,
radiators, ranges and refrigerators.
There is an increased risk of elec-
tric shock if your body is earthed or
grounded.
52
Do not expose power tools to rain
or wet conditions. Water entering
a power tool will increase the risk of
electric shock.
Do not abuse the cord. Never use
the cord for carrying, pulling or
unplugging the power tool. Keep
cord away from heat, oil, sharp
edges or moving parts. Damaged
or entangled cords increase the risk
of electric shock.
When operating a power tool out-
doors, use an extension cord suit-
able for outdoor use. Use of a cord
suitable for outdoor use reduces the
risk of electric shock.
If operating a power tool in a
damp location is unavoidable, use
a residual current device (RCD)
protected supply. Use of an RCD
reduces the risk of electric shock.
Personal safety
Stay alert, watch what you are do-
ing and use common sense when
operating a power tool. Do not use
a power tool while you are tired or
under the influence of drugs, alco-
hol or medication. A moment of in-
attention white operating power tools
may result in serious personal injury.
Use personal protective equip-
ment. Always wear eye protection.
Protective equipment such as dust
mask, non-skid safety shoes, hard
hat, or hearing protection used for
appropriate conditions will reduce
personal injuries.
Prevent unintentional starting.
Ensure the switch is in the off-po-
sition before connecting to power
source and/or battery pack, pick-
ing up or carrying the tool. Carry-
ing power tools with your finger on the

Publicidad

loading