Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
4. Press the accelerator with your right hand. The electric motor will deliver power when the
speed of the scooter is equal to or greater than 3 km/h.
5. Press the accelerator to increase the speed.
6. Push the brake lever to stop or to ride more slowly.
7. Get off the electric scooter only when you ride at a very low speed or when you are still.
8. Fold down the kickstand (15, Fig. 22) to park the electric scooter when not in use.
5.2 Driving modes. Fig. 23
Control panel
Power button:
-
Long press: switch the electric scooter on or off.
-
Short press: switch between the following modes:
1. PEDESTRIAN mode: the mode indicator on the display will show a person walking. In this
mode, the scooter can reach 6 km/h. The taillight will flash when driving in this mode.
2. CONFORT mode: In this mode, the scooter can reach 25 km/h.
3. SPORT mode: the mode indicator on the display will show a white "S". In this mode, the
scooter can reach 25 km/h.
NOTE: measured with a weight of 80 kg, fully charged battery, flat surface, no inclination, no
wind, and an ambient temperature of approx. 25 °C.
Function button:
-
Short press: switch the scooter lights on or off.
-
Long press (3 seconds): enter the settings menu.
5.3 Settings menu
-
Once inside the settings menu, press the power button to switch between P0, P1, R0, and
R1.
-
Press the function button to navigate between the different settings functions. Access the
desired function by pressing the power button and toggle between 0 and 1 by pressing
the function button. Select the desired setting by pressing the power button. To return to
the main settings menu, wait a few seconds without pressing any buttons. The different
settings functions are:
1. P0: units of measurement, km/h (0) or mph (1). Speed can be measured in kilometres per
hour (0) or miles per hour (1).
2. P1: total trip distance measurement (ODO) or current trip (TRIP).
3. R0/R1: cruise mode, cruise-speed activation (1) and deactivation (0). With cruise mode
enabled, hold the same speed for 7 seconds to keep the scooter steadily moving at that
66
ORIGINAL MANUAL TRANSLATION
Publicidad
