APRILIA eSR2 Guia Del Usuario página 10

Method:
• Take the item out of the packaging
• Open the kickstand and check that the item is stable
• Open the handlebar stem and secure it by closing the lever of the closing mechanism
• Connect the display power cable to the main wiring (if necessary)
• Install the handlebar on the stem (do not crush the cables)
• Tighten the screws on the stem using the wrench supplied
• Adjust the steering wheel closing* (if needed)
Steering column stability
Model Reference picture
eSR2
eSR2 EVO
Tuareg
eSRZ
eSRZ
Safe Ride
eSR2 EVO
(AP-
MO-220006)
eSRZ AS
* Adjustment
There is a hex screw inside the mechanism.
If the handlebar stem is not very stable after closing, adjust
the screw in the mechanism, by tightening or loosening it as
required to increase the stability of the stem.
There is a hex screw inside the mechanism.
If the handlebar stem is not very stable after closing, adjust
the screw in the mechanism, by tightening or loosening it as
required to increase the stability of the stem.
There is a hex screw inside the mechanism.
If the handlebar stem is not very stable after closing, adjust
the screw in the mechanism, by tightening or loosening it as
required to increase the stability of the stem.
09