Publicidad
Idiomas disponibles
Idiomas disponibles
5.3 Operating
How to use the control panel: Control Panel symbol legend.
- "End of cooking" programming knob
- Control thermostat knob / Temperature indicator light
- Line indicator light
Fig. 1
Programmer knob
It allows start up of the
appliance.
Programming cooking time - To run the oven, turn the programmer knob (Fig. 1) in line with symbol
(continuous operation) or in line with the selected cooking time (up to 120 minutes). In the latter
case, end of cooking is signalled by the oven which switches off automatically.
Programming cooking temperature - Turn the knob of the adjustment thermostat (Fig. 3) in line
with the temperature selected for cooking.
Control thermostat indicator light - The control thermostat orange indicator light goes OFF
whenever the programmed temperature is reached inside the cooking compartment. It switches on
again when the thermostat is activated to re-establish this temperature.
Line warning light - The electricity line indicator green light shows that the oven is electrically
connected to the power supply line and the cooking time is active.
Inner oven light - The light is always on when the oven is operating.
Baking - For cooking, before putting food in, warm up the oven to the required temperature. When
the oven reaches the temperature, put the food in and check cooking time. Switch off the oven 5
minutes before the theoretical time in order to recover stored heat.
Fig. 2
Multifunction selector knob
It sets the type of cooking
suitable for the different
cooking exigencies.
Fig. 3
Thermostat knob
It sets the desired temperature
in the cooking chamber.
Publicidad
